Dust filters
DCP’s compressed air cleaned envelope filters can be broadly divided into three main groups:
Cased filters Insertable filters Spot filters
Thanks to the integrated reverse jet cleaning system, these filters can be operated 24 hours per day without interruption.
Products
CARM-GH cased filter
This is a centrally positioned filter with which one or more dust emission sources can be extracted simultaneously. The modular design of the filter offers maximum flexibility in terms of set-up, filtration area and air flow rates. The flow rates can vary from 1,000 m3/h to as high as 100,000 m3/h.
The separated dust is collected in a dust bucket/container positioned under the hopper, or discharged via a screw conveyor or rotary valve into a big bag, or via another disposal route.
CARM-V insertable filter
Insertable filters are built into product receivers, silos, mixers, hammer mills, crushers and receiving hoppers, among others. Installed in customized housings, they can also be used at transfer points in conveyor belt systems. The separated dust is returned into the product flow. CARM-V filters are of a modular design.
This offers maximum flexibility in terms of filtration area and air flow rate. The flow rates can vary from 1,000 m3/h to 30,000 m3/h.
CARM BFE spot filter
An extremely compact filter that can be mounted at conveyor discharge points, chain conveyors and elevators. It can also be used as a silo venting filter. The separated dust is returned into the product flow. The air flow rates vary from 400 m3/h to 2,000 m3/h.
Why DCP dust filters?
- Low compressed air consumption during cleaning
- Customization and quality
- Suitable for ATEX zone 22 and explosive substances
